2020 SANY SAC2200T

2020

SANY

SAC2200T

600

Usado

Sany Original painting all this terrain crane 220T (SAC2200T) Year of manufacture: 2020 Main boom length: 76m Jib length : 21m Counterweight：76.5T 1. Core Lifting Performance Maximum Rated Lifting Capacity: 220 t (at 3 m minimum radius, basic boom) Maximum Lifting Moment (Basic Boom): 6664–7271 kN·m Maximum Lifting Moment (Full-extended Boom): 3190–3540 kN·m Minimum Rated Working Radius: 3 m Maximum Working Radius (Full-extended Boom): 70 m Rated Capacity at Full-boom Tip: ~2.5–2.8 t (at 73–75.5 m main boom length) 2. Boom & Jib System Boom Type: 7-section, U-shaped high-strength steel telescopic boom Basic Boom Length: 13.8–14.1 m Full-extended Main Boom Length: 73–75.5 m Maximum Combination Length (Boom + Jib): 92.6–106.6 m (standard) / Up to 107 m (optional) Auxiliary Jib Length: 16–43 m (depending on configuration) Jib Luffing Angles: 0°, 20°, 40° Maximum Lifting Height (Main Boom Only): 76 m (full extension) Maximum Lifting Height (Boom + Jib): 93–107 m 3. Dimensions & Vehicle Body Overall Length：15.53–16.43m Overall Width：2.995–3.00m Overall Height：4.0 m Load Capacity (Max Lifting) 220000kg Net Weight (Operating Weight)：54670–60000kg Gross Weight (Max Total Mass)：54800–60000kg Counterweight (Total)：76500kg 4. Travel & Chassis Drive Configuration: 10×8×10 (5-axle, all-wheel steer) Maximum Travel Speed: 80 km/h Minimum Turning Radius: 9.5–10 m Minimum Ground Clearance: 270–325 mm Approach/Departure Angle: 16–20° / 12–17° Maximum Gradeability: 45–58% Fuel Tank Capacity: 500 L Axle Load (Front/Rear): 10.45–12 t / 10.4–11.6 t 5. Work & Operation Speed Main Winch Line Speed (No Load): 130 m/min Main Winch Line Speed (Full Load): 45 m/min Auxiliary Winch Line Speed (No Load): 130 m/min Auxiliary Winch Line Speed (Full Load): 45 m/min Maximum Slewing Speed: 1.5–2.0 r/min Boom Telescoping Time (Full Ext/Ret): 660 s Boom Luffing Time (0° to 80°): 60–90 s 6. Stability & Outriggers Outrigger Span (Long × Trans): 8.3–9.46 m × 8.5–9.045 m Tail Swing Radius: 4.85–4.86 m Total Counterweight: 76.5 t (76500 kg) 8. Environmental & Safety Operating Temperature Range: -20 °C to +40 °C Safety System: Load Moment Limiter (LMI, ±3% accuracy), overload alarm, emergency stop, anti-slip protection Hydraulic Protection: Load-sensing constant-power system with balance valves & anti-cavitation controls

220 t

76 m

21 m

111 m

111 m

4

76,5 t

5