2021 POTAIN IGO T99

2021

POTAIN

IGO T99

1.954

620076

No verificado

Usado

Operativo

Chassis: Outriggers swing and lock into position. 14.8 ft (4.5 m) square outrigger spread with 10.8 ft (3.3 m) maximum turning radius and 9.8 ft (3 m) minimum turning radius. 23.6 in (600 mm) square outrigger pads are stowed on the crane during transport. Ballast: The ballast requirement for the crane consists of, twenty-one (21) slabs each weighing 4,850 lb (2,200 kg). Mast: Telescoping lattice mast is raised by an auxiliary winch and pulley block. Hook heights of 67.3 ft (20.5 m) and 77.1 ft (23.5 m) are achievable with the standard mast. 360˚ rotation possible during raising sequence. Mast Inserts: Three (3) 20 ft (6 m) mast inserts available to reach a maximum horizontal hook height of 126.3 ft (38.5 m). Increasing mast height with one insert provides hook heights of 86.9 ft (26.5 m) and 96.8 ft (29.5 m); the second mast insert provides hook heights of 106.6 ft (32.5 m) and 116.5 ft (35.5 m); the third mast insert provides a hook height of 126.3 ft (38.5 m). Jib: 157.5 ft (48 m) radius standard offsettable lattice jib. The jib can be offset to 30˚. Opening and aligning are carried out automatically by four hydraulic cylinders. Swing: HPS 152 slewing mechanism with a maximum swing speed of 0.8 rpm. Progressive control of the speed with counter-slewing possible, anti-load swinging system makes aligning the load and jib easier. Multiple rpm speeds are possible depending upon the selected parameter. Hoist: 25 HPL 15: 25 HP variable frequency hoist with 3,300 lb (1.5 t) line pull. Progressive speed change according to the accelerating or decelerating ramps. Trolley: 5 DVF 5 Optima: 5.5 HP variable frequency hoist with 1,102 lb (500 kg) line pull. Progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter. Optima allows the hoist to adapt its speed to the weight of the load. Reeving: Block with fixed 4-part line. 480 V, 60 Hz measured at the turntable is recommended for optimal performance. Power Control allows for a reduction in the power supply of 34 kVA to 24 kVA with the Ultra View Cab and 29 kVA to 21 kVA without the Ultra View Cab both from the city. For use with a generator, this translates to a reduction in the power supply of 58 kVA to 41 kVA with the Ultra View Cab and 50 kVA to 36 kVA without the Ultra View Cab. All power supply reductions result in a proportional reduction in hoisting speed. Earth rod and electric cable stored on the crane during transport. The wireless remote control provides information to the operator about wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation. Battery charger and extra battery are provided with the crane. Auxiliary push-button tethered remote ensures continual operation in case of battery or other malfunction of the wireless remote control. Optional tethered remote control ensures continuous operation with the same functions and ergonomics as the standard wireless remote control. Optional not include Ultra View Cab allows for improved operator visibility while operating the crane. Optional not included transport axle sets are available for both jobsite and highway applications. Jobsite axles are rated for 15.5 mph (25 km/h) and highway axles are rated for 50 mph (80 km/h).

5,99 t

1,33 ton

38,51 m

48,01 m

Sí

Sí

Sí

Sí

Sí

Sí

Sí

Sí

Sí

23,2 kW

480 V

60

Three

Sí

1.564,64 cm

248,92 cm

398,78 cm

20.996,79 Kg.